HF 100W
Box.v1
Version 1 was technically part of my original go kit though it only went to one place!
The radio was mounted using its mobile mount bracket to the side of the case with the display remotely mounted facing upwards for easy viewing. The LDG tuner was cable-tied to the radio with a short coax cable and control cable connecting them.
Box.v2
Version 2 is utilising a Dave 300 case which is not my standard, one, but it needed to be bigger to fit the FT-891 comfortably. It still fits in the motorbike top box!
Gear
- Yaesu FT-891 HF+6M radio
- LDG Z-100Plus HF 100W tuner
- RaspberryPi
CAD files
| Part | Download | Notes |
|---|---|---|
| Radio Bracket | RadioBracket.stl | x 2 bolt to the radio and hold the LDG tuner in place and lip over the front and back edge |
| Rear Tie Down | RearTieDown.stl | x 1 screw into the case to hold the RadioBracket securely |
| Front Tie Down | FrontTieDown.stl | x 1 screw into the case to hold the RadioBracket securely |
| Screen Holder | ScreenHolder.stl | x 1 holds the screen firmly in place. Slot fit onto and between the two RadioBrackets |
| Cable Guide | CableGuide.stl | x 2 screw to the case corners to guide cables when opening and closing the lid |
| Pi Holder | PiHolder.stl | x 1 to mount the Pi into the lid (Pi 2,3,4 holes) |